Standards New Zealand is seeking feedback on a proposal for a new field of technical activity on Remanufacturing of mechanical products. The national member body of International Organization for Standardization (ISO) in China, (SAC), has proposed this activity.

The purpose of the new committee, if established, is to prepare Standards in the field of mechanical product remanufacturing. The proposed work programme includes the following proposed Standards:

• Basic Standards of remanufacturing (terminology, general technical requirements, and specifications for mechanical products)
  
  
• General technology and craft Standards of remanufacturing (including disassembly, cleaning, detection, and repair of used products)
  
  
• General technical requirement Standards of remanufacturing
  
  
• Evaluation Standards of remanufacturing (including design, technology, and equipment evaluation)
  
  
• Remanufacturing Standards of mechanical products (including automobile, engineering machinery, engine, and machine tools)
  

→ Standards New Zealand is consulting with key stakeholders in this area to determine New Zealand's response. To receive a copy of the proposal, for more information, or to submit comments including support for or opposition to the proposal, please email isoadmin@standards.co.nz. Comments received will be used to form a New Zealand position on this proposal. Please provide your comments by Friday 12 July 2013

The national member body of International Organization for Standardization (ISO) in Israel, (SSI), is hosting a workshop on Multiple Resource Productivity (MRP). The workshop will be held from 8 to 11 July in Haifa in Israel.

There is an increasing understanding that basic resources such as water, energy, and land (food, biodiversity, and so on) are interlinked and interdependent, and that each project concerning one of them should be assessed for its impact on all of them. As a result, the need for a common assessment methodology and modelling process is required to be accepted internationally.

The impact on each basic resource, positive or negative, needs to be assessed using a common methodology that will allow for the addition of new resources into the assessment, and for the assessment to be conducted according to commonly agreed-on methodology. The objective of the workshop is to reach agreement on an International Workshop Agreement, which will be published by ISO.

→ For more information on the workshop, email isoadmin@standards.co.nz

→ Read about International Workshop Agreements(http://www.iso.org/iso/home/standards_development/deliverables-all.htm?type=iwa)

ISO has published a brochure on How to write Standards – tips for Standards writers. The brochure is for people wanting to write clear, concise, and user-friendly International Organization for Standardization (ISO) international Standards and other publications.

→ Download the brochure [PDF 545KB]

ISO's Annual Report 2012 outlines the organisation's performance last year and its future ambitions. 'In 2012, ISO looked to inspire innovative solutions for all industry sectors', comments ISO Secretary-General Rob Steele. 'We want to give our customers the tools for a simpler, faster, and better approach to develop, access, and use ISO Standards.'

Looking ahead to 2013 and beyond, the ISO Annual Report 2012 examines the organisation's future ambitions to deliver solutions for tomorrow's global challenges and to assist business and economies to recover from difficult times. As recently elected ISO President Terry Hill says, 'My appointment comes at a time when the world is looking to come out of this recession that we've been in for the last 4 to 5 years. Standards have to make sure that they are part of this resurgence.'

→ Download the ISO annual report at a glance [PDF 3.93MB]

Note: You can order ISO Standards from www.standards.co.nz or call 0800 782 632 during business hours or email enquiries@standards.co.nz. Members of Standards New Zealand receive a 20% discount on all NZS and AS/NZS Standards, and a 10% discount on all international Standards. Visit our membership page for more information.

Summarised from an ISO media release, 18 April 2013.

IEC, ISO, and ITU are launching a competition open to everyone, to design a poster illustrating the 2013 World Standards Day theme, 'International standards ensure positive change.'

The designer(s) of the best poster will win 1,500 Swiss francs, with the three runners-up receiving 500 Swiss francs each.

→ There is more information on the ISO website http://www.worldstandardscooperation.org/wsd2013.html

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

• A74 Standard Specification for Cast Iron Soil Pipe and Fittings has been revised to A74-13 developed by Committee A04.12, ASTM BOS Volume 01.02.
• A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings has been revised to A90/A90M-13 developed by Committee A05.07, ASTM BOS Volume 01.06.
• A275/A275M Standard Practice for Magnetic Particle Examination of Steel Forgings has been reapproved, available as A275/A275M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
• A324 Standard Specification for Ferrotitanium has been reapproved, available as A324-08(2013) developed by Committee A01.18, ASTM BOS Volume 01.02.
• A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems has been revised (with designation change) to A380/A380M developed by Committee A01.14, ASTM BOS Volume 01.03.
• A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire has been reapproved, available as A411-08(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
• A456/A456M Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings has been reapproved, available as A456/A456M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
• A459 Standard Specification for Zinc-Coated Flat Steel Armoring Tape has been reapproved, available as A459-08(2013) developed by Committee A05.11, ASTM BOS Volume 01.06.
• A474 Standard Specification for Aluminum-Coated Steel Wire Strand has been reapproved, available as A474-03(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
• A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels has been revised to A479/A479M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
• A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings has been revised to A484/A484M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
• A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy has been revised to A494/A494M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.
• A504/A504M Standard Specification for Wrought Carbon Steel Wheels has been reapproved, available as A504/A504M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
• A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel has been revised to A510/A510M-13 developed by Committee A01.03, ASTM BOS Volume 01.03.
• A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications has been reapproved, available as A551/A551M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
• A580/A580M Standard Specification for Stainless Steel Wire has been revised to A580/A580M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
• A636 Standard Specification for Nickel Oxide Sinter has been reapproved, available as A636-08(2013) developed by Committee A01.18, ASTM BOS Volume 01.02.
• A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability has been editorially changed, available as A656/A656M-12ae1 developed by Committee A01.02, ASTM BOS Volume 01.04.
• A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe has been revised to A742/A742M-13 developed by Committee A05.17, ASTM BOS Volume 01.06.
• A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire has been reapproved, available as A809-08(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
• A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire has been reapproved, available as A854/A854M-08(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
• A875/A875M Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process has been revised to A875/A875M-13 developed by Committee A05.11, ASTM BOS Volume 01.06.
• A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications has been revised to A888-13 developed by Committee A04.12, ASTM BOS Volume 01.02.
• A915/A915M Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades has been reapproved, available as A915/A915M-08(2013) developed by Committee A01.18, ASTM BOS Volume 01.02.
• A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process has been revised to A924/A924M-13 developed by Committee A05.11, ASTM BOS Volume 01.06.
• A1079 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galv-annealed) by the Hot-Dip Process has been revised to A1079-13 developed by Committee A05.11, ASTM BOS Volume 01.06.
• A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) is a new standard, now available. A1085-13 developed by Committee A01.09, ASTM BOS Volume 01.01.
• B2 Standard Specification for Medium-Hard-Drawn Copper Wire has been editorially changed, available as B2-12e1 developed by Committee B01.04, ASTM BOS Volume 02.03.
• B22 Standard Specification for Bronze Castings for Bridges and Turntables has been revised to B22-13 developed by Committee B05.05, ASTM BOS Volume 02.01.
• B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use has been revised to B100-13 developed by Committee B05.01, ASTM BOS Volume 02.01.
• B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes has been revised to B124/B124M-13 developed by Committee B05.02, ASTM BOS Volume 02.01.
• B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets has been revised to B130-13 developed by Committee B05.01, ASTM BOS Volume 02.01.
• B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar has been reapproved, available as B196/B196M-07(2013) developed by Committee B05.02, ASTM BOS Volume 02.01.
• B197/B197M Standard Specification for Copper-Beryllium Alloy Wire has been reapproved, available as B197/B197M-07(2013) developed by Committee B05.02, ASTM BOS Volume 02.01.
• B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire has been revised to B250/B250M-13 developed by Committee B05.02, ASTM BOS Volume 02.01.
• B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service has been revised to B280-13 developed by Committee B05.04, ASTM BOS Volume 02.01.
• B306 Standard Specification for Copper Drainage Tube (DWV) has been revised to B306-13 developed by Committee B05.04, ASTM BOS Volume 02.01.
• B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes has been reapproved, available as B398/B398M-02(2013) developed by Committee B01.07, ASTM BOS Volume 02.03.
• B415 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire has been reapproved, available as B415-98(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
• B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors has been reapproved, available as B416-98(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
• B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors has been revised to B496-13 developed by Committee B01.04, ASTM BOS Volume 02.03.
• B584 Standard Specification for Copper Alloy Sand Castings for General Applications has been revised to B584-13 developed by Committee B05.05, ASTM BOS Volume 02.01.
• B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding has been revised to B694-13 developed by Committee B05.01, ASTM BOS Volume 02.01.
• B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors has been revised to B738-13 developed by Committee B01.04, ASTM BOS Volume 02.03.
• B763 Standard Specification for Copper Alloy Sand Castings for Valve Applications has been revised to B763-13 developed by Committee B05.05, ASTM BOS Volume 02.01.
• B786 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation has been reapproved, available as B786-08(2013) developed by Committee B01.07, ASTM BOS Volume 02.03.
• B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) has been editorially changed, available as B857-11e2 developed by Committee B01.07, ASTM BOS Volume 02.03.
• B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire has been reapproved, available as B869-07(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
• B910/B910M Standard Specification for Annealed Copper-Clad Steel Wire has been reapproved, available as B910/B910M-07(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
• B961 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application has been revised to B961-13 developed by Committee B01.02, ASTM BOS Volume 02.03.
• B986 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application is a new standard, now available. B986-13 developed by Committee B01.02, ASTM BOS Volume 02.03.
• C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems has been revised to C11-13 developed by Committee C11.91, ASTM BOS Volume 04.01.
• C12 Standard Practice for Installing Vitrified Clay Pipe Lines has been revised to C12-13 developed by Committee C04.20, ASTM BOS Volume 04.05.
• C94/C94M Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-13 developed by Committee C09.40, ASTM BOS Volume 04.02.
• C125 Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-13 developed by Committee C09.91, ASTM BOS Volume 04.02.
• C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units has been revised to C140-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
• C478 Standard Specification for Precast Reinforced Concrete Manhole Sections has been revised to C478-13 developed by Committee C13.06, ASTM BOS Volume 04.05.
• C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric) has been revised to C478M-13 developed by Committee C13.06, ASTM BOS Volume 04.05.
• C494/C494M Standard Specification for Chemical Admixtures for Concrete has been revised to C494/C494M-13 developed by Committee C09.23, ASTM BOS Volume 04.02.
• C595/C595M Standard Specification for Blended Hydraulic Cements has been revised to C595/C595M-13 developed by Committee C01.10, ASTM BOS Volume 04.01.
• C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast has been reinstated, with revision to C935-13 developed by Committee C27.20, ASTM BOS Volume 04.05.
• C1026 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling has been revised (with title change) to C1026-13 developed by Committee C21.06, ASTM BOS Volume 15.02.
• C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems has been editorially changed, available as C1242-12ae1 developed by Committee C18.06, ASTM BOS Volume 04.07.
• C1332 Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique has been reapproved, available as C1332-01(2013) developed by Committee C28.03, ASTM BOS Volume 15.01.
• C1341 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites has been revised to C1341-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
• C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures has been revised to C1359-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
• C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures has been revised to C1425-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
• C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers has been revised to C1433-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
• C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) has been revised to C1433M-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
• C1468 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature has been revised to C1468-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
• C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections has been revised to C1513-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
• D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension has been reapproved, available as D412-06a(2013) developed by Committee D11.10, ASTM BOS Volume 09.01.
• D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting has been revised to D1004-13 developed by Committee D20.19, ASTM BOS Volume 08.01.
• D1129 Standard Terminology Relating to Water has been revised to D1129-13 developed by Committee D19.02, ASTM BOS Volume 11.01.
• D1535 Standard Practice for Specifying Color by the Munsell System has been revised to D1535-13 developed by Committee E12.07, ASTM BOS Volume 06.01.
• D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics has been revised to D1693-13 developed by Committee D20.15, ASTM BOS Volume 08.01.
• D1932 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes has been revised to D1932-13 developed by Committee D09.01, ASTM BOS Volume 10.01.
• D2457 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics has been revised to D2457-13 developed by Committee D20.40, ASTM BOS Volume 08.01.
• D2595 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range has been editorially changed, available as D2595-96(2008)e1 developed by Committee D02.G0.03, ASTM BOS Volume 05.01.
• D2749 Standard Symbols for Dimensions of Plastic Pipe Fittings has been revised to D2749-13 developed by Committee F17.10, ASTM BOS Volume 08.04.
• D2844/D2844M Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils has been revised (with designation change) to D2844/D2844M-13 developed by Committee D18.08, ASTM BOS Volume 04.08.
• D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) has been editorially changed, available as D2872-12e1 developed by Committee D04.46, ASTM BOS Volume 04.03.
• D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography has been revised to D2887-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.01.
• D3012 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven has been revised to D3012-13 developed by Committee D20.15, ASTM BOS Volume 08.01.
• D3060 Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products has been reapproved, available as D3060-94(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
• D3061 Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans has been reapproved, available as D3061-97(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
• D3064 Standard Terminology Relating To Aerosol Products has been reapproved, available as D3064-97(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
• D3065 Standard Test Methods for Flammability of Aerosol Products has been reapproved, available as D3065-01(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
• D3069 Standard Test Method for Delivery Rate of Aerosol Products has been reapproved, available as D3069-94(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
• D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications has been revised to D3244-12 developed by Committee D02.94, ASTM BOS Volume 05.01.
• D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials has been editorially changed, available as D3350-12e1 developed by Committee D20.15, ASTM BOS Volume 08.02.
• D3594 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers has been reapproved, available as D3594-93(2013) developed by Committee D20.70, ASTM BOS Volume 08.02.
• D3614 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions has been reapproved, available as D3614-07(2013) developed by Committee D22.01, ASTM BOS Volume 11.07.
• D3686 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) has been revised to D3686-13 developed by Committee D22.04, ASTM BOS Volume 11.07.
• D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells has been editorially changed, available as D3753-12e1 developed by Committee D20.23, ASTM BOS Volume 08.03.
• D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil has been revised to D3829-12 developed by Committee D02.07, ASTM BOS Volume 05.02.
• D3955 Standard Specification for Electrical Insulating Varnishes has been revised to D3955-13 developed by Committee D09.01, ASTM BOS Volume 10.02.
• D4000 Standard Classification System for Specifying Plastic Materials has been revised to D4000-13 developed by Committee D20.94, ASTM BOS Volume 08.02.
• D4332 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing has been revised to D4332-13 developed by Committee D10.21, ASTM BOS Volume 15.10.
• D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane has been revised to D4637/D4637M-13 developed by Committee D08.18, ASTM BOS Volume 04.04.
• D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil has been revised to D4648/D4648M-13 developed by Committee D18.05, ASTM BOS Volume 04.08.
• D4669 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols has been reapproved (with editorial change), available as D4469-07(2013)e1 developed by Committee D20.22, ASTM BOS Volume 08.02.
• D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature has been revised to D4684-12 developed by Committee D02.07, ASTM BOS Volume 05.02.
• D4733 Standard Test Methods for Solventless Electrical Insulating Varnishes has been revised to D4733-13 developed by Committee D09.01, ASTM BOS Volume 10.02.
• D4765 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes has been revised (with title change) to D4765-13 developed by Committee D22.04, ASTM BOS Volume 11.07.
• D4884 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles has been revised (with title change) to D4884-13 developed by Committee D35.01, ASTM BOS Volume 04.13.
• D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration has been revised to D4928-12 developed by Committee D02.02, ASTM BOS Volume 05.02.
• D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit has been revised (with designation change) to D5030/D5030M-13 developed by Committee D18.08, ASTM BOS Volume 04.08.
• D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists has been revised to D5055-13 developed by Committee D07.02, ASTM BOS Volume 04.10.
• D5071 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus has been reapproved, available as D5071-06(2013) developed by Committee D20.96, ASTM BOS Volume 08.03.
• D5196 Standard Guide for Bio-Applications Grade Water has been reapproved, available as D5196-06(2013) developed by Committee D19.02, ASTM BOS Volume 11.01.
• D5272 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics has been reapproved, available as D5272-08(2013) developed by Committee D20.96, ASTM BOS Volume 08.03.
• D5280 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions has been reapproved, available as D5280-96(2013) developed by Committee D22.03, ASTM BOS Volume 11.07.
• D5576 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) has been reapproved, available as D5576-00(2013) developed by Committee D20.70, ASTM BOS Volume 08.03.
• D5630 Standard Test Method for Ash Content in Plastics has been revised to D5630-13 developed by Committee D20.70, ASTM BOS Volume 08.03.
• D5835 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations has been reapproved, available as D5835-95(2013) developed by Committee D22.03, ASTM BOS Volume 11.07.
• D5836 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) has been reapproved, available as D5836-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
• D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils has been revised to D5918-13 developed by Committee D18.19, ASTM BOS Volume 04.09.
• D5932 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace has been reapproved, available as D5932-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
• D6209 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) has been revised to D6209-13 developed by Committee D22.03, ASTM BOS Volume 11.07.
• D6246 Standard Practice for Evaluating the Performance of Diffusive Samplers has been reapproved, available as D6246-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
• D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus has been editorially changed, available as D6278-12e1 developed by Committee D02.07, ASTM BOS Volume 05.03.
• D6289 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics has been revised to D6289-13 developed by Committee D20.09, ASTM BOS Volume 08.03.
• D6321/D6321M Standard Practice for the Evaluation of Machine Washable T-Shirts has been revised (with designation change) to D6321/D6321M developed by Committee D13.61, ASTM BOS Volume 07.02.
• D6331 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) has been revised to D6331-13 developed by Committee D22.03, ASTM BOS Volume 11.07.
• D6352 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography has been revised to D6352-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.03.
• D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products has been revised to D6670-13 developed by Committee D22.05, ASTM BOS Volume 11.07.
• D6803 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers has been revised to D6803-13 developed by Committee D22.05, ASTM BOS Volume 11.07.
• D6817 Standard Specification for Rigid Cellular Polystyrene Geofoam has been revised to D6817-13 developed by Committee D35.03, ASTM BOS Volume 04.13.
• D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer has been revised to D6821-12 developed by Committee D02.07, ASTM BOS Volume 05.03.
• D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber has been revised to D6890-13 developed by Committee D02.01, ASTM BOS Volume 05.05.
• D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature has been revised to D6896-12 developed by Committee D02.07, ASTM BOS Volume 05.03.
• D6966 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals has been revised to D6966-13 developed by Committee D22.04, ASTM BOS Volume 11.07.
• D6978 Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs has been reapproved, available as D6978-05(2013) developed by Committee D11.40, ASTM BOS Volume 09.02.
• D6988 Standard Guide for Determination of Thickness of Plastic Film Test Specimens has been revised to D6988-13 developed by Committee D20.19, ASTM BOS Volume 08.03.
• D7026 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis has been reinstated, with revision to D7026-13 developed by Committee D20.96, ASTM BOS Volume 08.03.
• D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) has been revised to D7042-12a developed by Committee D02.07, ASTM BOS Volume 05.04.
• D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles has been revised to D7109-12 developed by Committee D02.07, ASTM BOS Volume 05.04.
• D7140/D7140M Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials has been revised (with designation change) to D7140/D7140M-13 developed by Committee D13.52, ASTM BOS Volume 07.02.
• D7210 Standard Practice for Extraction of Additives in Polyolefin Plastics has been revised to D7210-13 developed by Committee D20.70, ASTM BOS Volume 08.03.
• D7213 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography has been editorially changed, available as D7213-12e1 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
• D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer has been revised to D7224-12 developed by Committee D02.J0, ASTM BOS Volume 05.04.
• D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer has been revised to D7261-12 developed by Committee D02.14, ASTM BOS Volume 05.04.
• D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) has been editorially changed, available as D7266-13e1 developed by Committee D16.01, ASTM BOS Volume 06.04.
• D7387 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods) has been revised to D7387-13 developed by Committee D10.21, ASTM BOS Volume 15.10.
• D7441 Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples has been reapproved, available as D7441-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
• D7500 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography has been revised to D7500-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
• D7547 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline has been revised (with title change) to D7547-12 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
• D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection has been revised to D7756-12 developed by Committee D02.H0, ASTM BOS Volume 05.04.
• D7782 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data Editorial Review Board change D7782 developed by Committee D19.02, ASTM BOS Volume 11.01.
• D7783 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data Editorial Review Board change D7783 developed by Committee D19.02, ASTM BOS Volume 11.01.
• D7798 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538°C by Ultra Fast Gas Chromatography (UF GC) is a new standard, now available. D7798-13 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
• D7807 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection is a new standard, now available. D7807-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
• D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge is a new standard, now available. D7830/D7830M-13 developed by Committee D18.08, ASTM BOS Volume 04.09.
• D7853 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete is a new standard, now available. D7853-13 developed by Committee D35.01, ASTM BOS Volume 04.13.
• D7859 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers is a new standard, now available. D7859-13 developed by Committee D22.05, ASTM BOS Volume 11.07.
• E73 Standard Practice for Static Load Testing of Truss Assemblies has been revised to E73-13 developed by Committee E06.11, ASTM BOS Volume 04.11.
• E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading has been reapproved, available as E855-08(2013) developed by Committee E28.02, ASTM BOS Volume 03.01.
• E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings has been revised to E935-13 developed by Committee E06.56, ASTM BOS Volume 04.11.
• E1384 Standard Practice for Content and Structure of the Electronic Health Record (EHR) has been reapproved, available as E1384-07(2013) developed by Committee E31.25, ASTM BOS Volume 14.01.
• E1459 Standard Guide for Physical Evidence Labeling and Related Documentation has been revised to E1459-13 developed by Committee E30.11, ASTM BOS Volume 14.02.
• E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods has been editorially changed, available as E1488-12e1 developed by Committee E11.20, ASTM BOS Volume 14.02.
• E1633 Standard Specification for Coded Values Used in the Electronic Health Record has been reapproved, available as E1633-08(2013) developed by Committee E31.25, ASTM BOS Volume 14.01.
• E1776 Standard Guide for Development of Fire-Risk-Assessment Standards has been revised to E1776-13 developed by Committee E05.33, ASTM BOS Volume 04.07.
• E1953 Standard Practice for Description of Thermal Analysis and Rheology Apparatus has been reapproved, available as E1953-07(2013) developed by Committee E37.10, ASTM BOS Volume 14.02.
• E1994 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans has been reapproved, available as E1994-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
• E2161 Standard Terminology Relating to Performance Validation in Thermal Analysis has been revised to E2161-13 developed by Committee E37.03, ASTM BOS Volume 14.02.
• E2178 Standard Test Method for Air Permeance of Building Materials has been revised to E2178-13 developed by Committee E06.41, ASTM BOS Volume 04.12.
• E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens has been revised to E2248-13 developed by Committee E28.07, ASTM BOS Volume 03.01.
• E2255 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings (Withdrawn 2013) has been withdrawn, with no replacement. E2255-04 developed by Committee E06.23, ASTM BOS Volume 04.12.
• E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials has been revised to E2298-13 developed by Committee E28.07, ASTM BOS Volume 03.01.
• E2306 Standard Practice for Disposal of Personal Property has been revised to E2306-13 developed by Committee E53.04, ASTM BOS Volume 04.12.
• E2334 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample has been reapproved, available as E2334-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
• E2430 Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”) has been reapproved, available as E2430-05(2013) developed by Committee E06.58, ASTM BOS Volume 04.12.
• E2495 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition has been revised to E2495-13 developed by Committee E53.05, ASTM BOS Volume 04.12.
• E2503 Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus has been revised to E2503-13 developed by Committee E55.03, ASTM BOS Volume 14.02.
• E2510 Standard Test Method for Torque Calibration or Conformance of Rheometers has been reapproved, available as E2510-07(2013) developed by Committee E37.08, ASTM BOS Volume 14.02.
• E2523 Standard Terminology for Metalworking Fluids and Operations has been revised to E2523-13 developed by Committee E34.50, ASTM BOS Volume 11.03.
• E2696 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution has been reapproved, available as E2696-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
• E2809 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations is a new standard, now available. E2809-13 developed by Committee E30.01, ASTM BOS Volume 14.02.
• E2909 Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations is a new standard, now available. E2909-13 developed by Committee E56.01, ASTM BOS Volume 14.02.
• E2923 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry is a new standard, now available. E2923-13 developed by Committee E06.21, ASTM BOS Volume 04.12.
• F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) has been revised to F138-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
• F677 Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications has been revised to F677-13 developed by Committee D09.01, ASTM BOS Volume 10.02.
• F767 Standard Test Method for Image Stability of Chemical Carbonless Paper to Light has been reapproved, available as F767-98(2013) developed by Committee F05.06, ASTM BOS Volume 15.09.
• F788 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series has been revised to F788-13 developed by Committee F16.93, ASTM BOS Volume 01.08.
• F833 Standard Consumer Safety Performance Specification for Carriages and Strollers has been revised to F833-13 developed by Committee F15.17, ASTM BOS Volume 15.11.
• F858 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type has been reapproved (with editorial change), available as F858-07R13e1 developed by Committee F26.01, ASTM BOS Volume 15.12.
• F860 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type has been reapproved, available as F860-07(2013) developed by Committee F26.01, ASTM BOS Volume 15.12.
• F1021 Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines has been reapproved, available as F1021-95(2013) developed by Committee F26.01, ASTM BOS Volume 15.12.
• F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) has been revised to F1314-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
• F1351 Standard Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems has been reapproved, available as F1351-96(2013) developed by Committee F05.04, ASTM BOS Volume 15.09.
• F1371 Standard Specification for Vegetable Peeling Machines, Electric has been revised to F1371-13 developed by Committee F26.04, ASTM BOS Volume 15.12.
• F1405 Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method has been reapproved, available as F1405-08(2013) developed by Committee F05.06, ASTM BOS Volume 15.09.
• F1427 Standard Consumer Safety Specification for Bunk Beds has been revised to F1427-13 developed by Committee F15.30, ASTM BOS Volume 15.11.
• F1434 Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer has been reapproved, available as F1434-97(2013) developed by Committee F05.04, ASTM BOS Volume 15.09.
• F1486 Standard Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method) has been reapproved, available as F1486-96(2013) developed by Committee F05.04, ASTM BOS Volume 15.09.
• F1623 Standard Terminology Relating to Thermal Imaging Products has been reapproved, available as F1623-96(2013) developed by Committee F05.01, ASTM BOS Volume 15.09.
• F1700 Standard Specification for Solid Vinyl Floor Tile has been revised to F1700-13 developed by Committee F06.80, ASTM BOS Volume 15.04.
• F1714 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices has been reapproved, available as F1714-96(2013) developed by Committee F04.22, ASTM BOS Volume 13.01.
• F2067 Standard Practice for Development and Use of Oil-Spill Trajectory Models has been revised to F2067-13 developed by Committee F20.16, ASTM BOS Volume 11.05.
• F2083 Standard Specification for Knee Replacement Prosthesis has been revised to F2083-12 developed by Committee F04.22, ASTM BOS Volume 13.01.
• F2194 Standard Consumer Safety Specification for Bassinets and Cradles has been revised to F2194-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
• F2245 Standard Specification for Design and Performance of a Light Sport Airplane has been revised to F2245-13 developed by Committee F37.20, ASTM BOS Volume 15.11.
• F2286 Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas has been reapproved, available as F2286-05(2013) developed by Committee F15.49, ASTM BOS Volume 15.11.
• F2345 Standard Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads has been reapproved, available as F2345-03(2013) developed by Committee F04.22, ASTM BOS Volume 13.01.
• F2463 Standard Terminology for Livestock, Meat, and Poultry Evaluation Systems has been editorially changed, available as F2463-12be1 developed by Committee F10.50, ASTM BOS Volume 15.12.
• F2508 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces has been revised to F2508-13 developed by Committee F13.10, ASTM BOS Volume 15.07.
• F2632 Standard Practice for Determining the Toner Usage for Color Printer Cartridges has been editorially changed, available as F2632-07(2013)e1 developed by Committee F05.04, ASTM BOS Volume 15.09.
• F2897 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances) has been editorially changed, available as F2897-11ae1 developed by Committee F17.60, ASTM BOS Volume 08.04.
• F2965 Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments is a new standard, now available. F2965-13 developed by Committee F13.50, ASTM BOS Volume 15.07.
• F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications has been revised to F2989-13 developed by Committee F04.12, ASTM BOS Volume 13.02.
• F3000/F3000M Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats is a new standard, now available. F3000/F3000M-13 developed by Committee F14.40, ASTM BOS Volume 01.06.
• F3001 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion is a new standard, now available. F3001-13 developed by Committee F42.05, ASTM BOS Volume 10.04.
• F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) has been revised to F606M-13 developed by Committee F16.01, ASTM BOS Volume 01.08.

To purchase PDF or hard copy Australian Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

New Standards

• AS 3533.4.2-2013 Amusement rides and devices - Specific requirements - Contained play facilities
  Specifies minimum safety requirements for the design, development, installation, inspection, maintenance, supervision levels and operation of contained play facilities. To be applied in conjunction with AS 3533, Parts 1 and 2.
• AS 5388.3-2013 Forensic analysis - Interpretation
  This Standard sets out guidelines and requirements for interpreting observations and analytical data to obtain information and knowledge and formulate an opinion.
• AS 5388.4-2013 Forensic analysis - Reporting
  This Standard sets out requirements and recommendations for the reporting of results and opinions, derived from scientific data and observations in the analysis and examination of physical material, for investigative purposes and for use in legal proceedings.
• AS 5577-2013 Electricity network safety management systems
  This Standard provides nationally consistent requirements for the development of an Electricity Network Safety Management System (ENSMS) by an Electricity Network Operator. An ENSMS is used to define how the Network Operator ensures the safe design, construction, commissioning, operation, maintenance and decommissioning of its electricity network.
• AS ISO 12646-2013 Graphic technology - Displays for colour proofing - Characteristics and viewing conditions
  Adopts ISO 12646:2008 to specify the minimum requirements for the characteristics of displays to be used for soft proofing of colour images.
• AS ISO 12647.3-2013 Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints
  Adopts ISO 12647-3:2005 to list and explain the minimum set of process parameters required to uniquely define the visual characteristics and related technical properties of a half-tone proof or production print produced by coldset offset lithography on newsprint, or half-tone proof designed to simulate this, from a set of half-tone separation films.

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATIONS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

• BS 5410-2:2013 Code of practice for oil firing. Installations over 45 kW output capacity for space heating, hot water and steam supply services
  Supersedes BS 5410-2:1978
• BS 5839-1:2013 Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
  Supersedes BS 5839-1:2002+A2:2008
• BS 5839-8:2013 Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of voice alarm systems
  Supersedes BS 5839-8:2008
• BS 8568:2013 Cleanroom energy. Code of practice for improving energy efficiency in cleanrooms and clean air devices

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

• BS EN ISO 105-E02:2013 Textiles. Tests for colour fastness. Colour fastness to sea water
  Supersedes BS EN ISO 105-E02:1996
• BS EN 228:2012 Automotive fuels. Unleaded petrol. Requirements and test methods
  Supersedes BS EN 228:2008
• BS EN 302-1:2013 Adhesives for load-bearing timber structures. Test methods. Determination of longitudinal tensile shear strength
  Supersedes BS EN 302-1:2004
• BS EN 302-2:2013 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
  Supersedes BS EN 302-2:2004
• BS EN 302-3:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
  Supersedes BS EN 302-3:2004
• BS EN 302-4:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
  Supersedes BS EN 302-4:2004
• BS EN 302-6:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the minimum pressing time under referenced conditions
  Supersedes BS EN 302-6:2004
• BS EN 302-7:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions
  Supersedes BS EN 302-7:2004
• BS EN 480-15:2013 Admixtures for concrete, mortar and grout. Test methods. Reference concrete and method for testing viscosity modifying admixtures
• BS EN ISO 717-1:2013 Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation
  Supersedes BS EN ISO 717-1:1997
• BS EN ISO 717-2:2013 Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation
  Supersedes BS EN ISO 717-2:1997
• BS EN 823:2013 Thermal insulating products for building applications. Determination of thickness
  Supersedes BS EN 823:1995
• BS EN 824:2013 Thermal insulating products for building applications. Determination of squareness
  Supersedes BS EN 824:1995
• BS EN 825:2013 Thermal insulating products for building applications. Determination of flatness
  Supersedes BS EN 825:1995
• BS EN 826:2013 Thermal insulating products for building applications. Determination of compression behaviour
  Supersedes BS EN 826:1996
• BS EN 1080:2013 Impact protection helmets for young children
  Supersedes BS EN 1080:1997
• BS EN 1242:2013 Adhesives. Determination of isocyanate content
  Supersedes BS EN 1242:2005
• BS EN 1316-1:2012 Hardwood round timber. Qualitative classification. Oak and beech
  Supersedes BS EN 1316-1:1997
• BS EN 1602:2013 Thermal insulating products for building applications. Determination of the apparent density
  Supersedes BS EN 1602:1997
• BS EN 1603:2013 Thermal insulating products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23ºC/50% relative humidity)
  Supersedes BS EN 1603:1997
• BS EN 1604:2013 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
  Supersedes BS EN 1604:1996
• BS EN 1605:2013 Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
  Supersedes BS EN 1605:1997
• BS EN 1606:2013 Thermal insulating products for building applications. Determination of compressive creep
  Supersedes BS EN 1606:1997
• BS EN 1796:2013 Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
  Supersedes BS EN 1796:2006+A1:2008
• BS EN ISO 1833-22:2013 Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)
• BS EN ISO 1833-26:2013 Textiles. Quantitative chemical analysis. Mixtures of melamine and cotton or aramide fibres (method using hot formic acid)
• BS EN 1910:2013 Wood flooring and wood panelling and cladding. Determination of dimensional stability
  Supersedes BS EN 1910:2000
• BS EN 2840:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
• BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
• BS EN ISO 3233-1:2013 Paints and varnishes. Determination of the percentage volume of non-volatile matter. Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
  Supersedes BS 3900-A10:1998
• BS EN 3698:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
• BS EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
  Supersedes BS EN 24492:1993
• BS EN 4628:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 1150 MPa ≤ Rm ≤ 1300 MPa
  Supersedes BS EN 4628:2007
• BS EN 4629:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ≤ 300 mm
  Supersedes BS EN 4629:2007
• BS EN 4631:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1050 MPa
  Supersedes BS EN 4631:2007
• BS EN ISO 5526:2013 Cereals, pulses and other food grains. Nomenclature
  Supersedes BS 6860:1987
• BS EN ISO 8536-4:2013 Infusion equipment for medical use. Infusion sets for single use, gravity feed
  Supersedes BS EN ISO 8536-4:2010
• BS EN 9104-001:2013 Aerospace series. Quality management systems. Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
• BS EN ISO 10323:2013 Dentistry. Bore diameters for rotary instruments such as discs and wheels
  Supersedes BS EN ISO 10323:1996
• BS EN 12085:2013 Thermal insulating products for building applications. Determination of linear dimensions of test specimens
  Supersedes BS EN 12085:1997
• BS EN 12086:2013 Thermal insulating products for building applications. Determination of water vapour transmission properties
  Supersedes BS EN 12086:1997
• BS EN 12089:2013 Thermal insulating products for building applications. Determination of bending behaviour
  Supersedes BS EN 12089:1997
• BS EN 12090:2013 Thermal insulating products for building applications. Determination of shear behaviour
  Supersedes BS EN 12090:1997
• BS EN 12091:2013 Thermal insulating products for building applications. Determination of freeze-thaw resistance
  Supersedes BS EN 12091:1997
• BS EN ISO 12217-1:2013 Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m
  Supersedes BS EN ISO 12217-1:2002+A1:2009
• BS EN ISO 12217-2:2013 Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
  Supersedes BS EN ISO 12217-2:2002
• BS EN ISO 12217-3:2013 Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m
  Supersedes BS EN ISO 12217-3:2002+A1:2009
• BS EN 12430:2013 Thermal insulating products for building applications. Determination of behaviour under point load
  Supersedes BS EN 12430:1998
• BS EN 12431:2013 Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
  Supersedes BS EN 12431:1998
• BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
  Supersedes BS EN 12750:2001+A1:2009
• BS EN 12786:2013 Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards
  Supersedes BS EN 12786:1999
• BS EN 13135:2013 Cranes. Safety. Design. Requirements for equipment
  Supersedes BS EN 13135-1:2003+A1:2010 and BS EN 13135-2:2004+A1:2010
• BS EN 13282-1:2013 Hydraulic road binders. Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
  Supersedes DD ENV 13282:2000
• BS EN 13282-3:2013 Hydraulic road binders. Conformity evaluation
• BS EN 13442:2013 Wood flooring and wood panelling and cladding. Determination of the resistance to chemical agents
  Supersedes BS EN 13442:2002
• BS EN 13752:2012 Chemicals used for treatment of water intended for human consumption. Manganese dioxide
  Supersedes BS EN 13752:2009
• BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
  Supersedes BS EN 13774:2003
• BS EN 13804:2013 Foodstuffs. Determination of elements and their chemical species. General considerations and specific requirements
  Supersedes BS EN 13804:2002
• BS EN 13984:2013 Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
  Supersedes BS EN 13984:2004+A1:2006
• BS EN 14274:2013 (BS 2000-508:2013) Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS)
  Supersedes BS EN 14274:2003
• BS EN 14275:2013 (BS 2000-509:2013) Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers
  Supersedes BS EN 14275:2003
• BS EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints
  Supersedes BS EN 14364:2006+A1:2008
• BS EN ISO 14644-10:2013 Cleanrooms and associated controlled environments. Classification of surface cleanliness by chemical concentration
• BS EN 14654-2:2013 Management and control of operational activities in drain and sewer systems outside buildings. Rehabilitation
• BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
  Supersedes BS EN 14678-1:2006+A1:2009
• BS EN ISO 14720-2:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
• BS EN ISO 14890:2013 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
  Supersedes BS EN ISO 14890:2003
• BS EN 15429-2:2012 Sweepers. Performance requirements and test methods
• BS EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). General
  Supersedes BS EN ISO 15874-1:2003
• BS EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes
  Supersedes BS EN ISO 15874-2:2003
• BS EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings
  Supersedes BS EN ISO 15874-3:2003
• BS EN ISO 15874-5:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system
  Supersedes BS EN ISO 15874-5:2003
• BS EN ISO 16119-1:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. General
  Supersedes BS EN 12761-1:2001
• BS EN ISO 16119-2:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Horizontal boom sprayers
  Supersedes BS EN 12761-2:2001
• BS EN ISO 16119-3:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Sprayers for bush and tree crops
  Supersedes BS EN 12761-3:2001
• BS EN ISO 16180:2013 Small craft. Navigation lights. Installation, placement and visibility
• BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
• BS EN 16230-1:2013 Leisure karts. Safety requirements and test methods for karts
• BS EN 16289:2013 Glass packaging. Screw finishes for pressure capsules. MCA 7,5 RF finish
• BS EN 16291-1:2013 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 2 finish
• BS EN 16291-2:2013 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 2 finish
• BS EN 16292:2013 Glass packaging. Screw finishes. Depressed threads
• BS EN 16293:2013 Packaging. Glass packaging. Deep BVS finishes for still wines
• BS EN 16301:2013 Natural stone test methods. Determination of sensitivity to accidental staining
• BS EN 16325:2013 Guarantees of Origin related to energy. Guarantees of Origin for Electricity
• BS EN 16352:2013 Logistics. Specifications for reporting crime incidents
• BS EN 16445:2013 Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
• BS EN ISO 16911-1:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Manual reference method
• BS EN ISO 16911-2:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Automated measuring systems
• BS EN ISO 19001:2013 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
• BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
  Supersedes BS EN ISO 20795-1:2008
• BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
  Supersedes BS EN ISO 20795-2:2010
• BS EN ISO 21091:2013 Health informatics. Directory services for healthcare providers, subjects of care and other entities
• BS EN ISO 21180:2013 Light conveyor belts. Determination of the maximum tensile strength
  Supersedes BS EN ISO 21180:2006
• BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
  Supersedes BS EN ISO 21181:2006
• BS EN ISO 21182:2013 Light conveyor belts. Determination of the coefficient of friction
  Supersedes BS EN ISO 21182:2006
• BS EN ISO 22476-4:2012 Geotechnical investigation and testing. Field testing. Menard pressure meter test
  Partially supersedes BS 5930:1999+A2:2010
• BS EN ISO 22476-5:2012 Geotechnical investigation and testing. Field testing. Flexible dilatometer test
  Partially supersedes BS 5930:1999+A2:2010
• BS EN ISO 22476-7:2012 Geotechnical investigation and testing. Field testing. Borehole jack test
  Partially supersedes BS 5930:1999+A2:2010
• BS EN ISO 23640:2013 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
  Supersedes BS EN ISO 23640:2011
• BS EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
• BS EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from hand-held and body-mounted wireless communication devices used by the general public (30 MHz – 6 GHz)
• BS EN 60349-4:2013 Electric traction. Rotating electrical machines for rail and road vehicles. Permanent magnet synchronous electrical machines connected to an electronic converter
• BS EN 61056-1:2012 General purpose lead-acid batteries (valve regulated types). General requirements, functional characteristics. Methods of test
  Supersedes BS EN 61056-1:2003
• BS EN 61131-6:2012 Programmable controllers. Functional safety
• BS EN 61280-2-2:2012 Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement
  Supersedes BS EN 61280-2-2:2008
• BS EN 61400-4:2013 Wind turbines. Design requirements for wind turbine gearboxes
  Supersedes BS ISO 81400-4:2005
• BS EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
  Supersedes BS EN 60439-4:2004
• BS EN 61513:2013 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
  Supersedes BS IEC 61513:2011
• BS EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
• BS EN 61674:2013 Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
  Supersedes BS EN 61674:1998 which remains current
• BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Single mode fibre pigtailed style optical fuse for category C. Controlled environment
• BS EN 61772:2013 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
  Supersedes BS IEC 61772:2009
• BS EN 61850-7-410:2013 Communication networks and systems for power utility automation. Basic communication structure. Hydroelectric power plants. Communication for monitoring and control
  Supersedes BS EN 61850-7-410:2007
• BS EN 61993-2:2013 Maritime navigation and radiocommunication equipment and systems. Automatic Identification Systems (AIS). Class A shipborne equipment of the automatic identification system (AIS). Operational and performance requirements, methods of test and required test results
  Supersedes BS EN 61993-2:2002
• BS EN 62271-101:2013 High-voltage switchgear and controlgear. Synthetic testing
  Supersedes BS EN 62271-101:2006+A1:2010
• BS EN 62382:2013 Control systems in the process industry. Electrical and instrumentation loop check
  Supersedes BS EN 62382:2007
• BS EN 62488-1:2013 Power line communication systems for power utility applications. Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
  Supersedes BS EN 60495:1994

BS ENs IMPLEMENTED BY AMENDMENT

• BS EN ISO 10930:2013 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
  Implementation of European Standard EN ISO 10930 by amendment to BS ISO 10930:2012
• BS EN ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
  Implementation of European Standard EN ISO 11269-1 by amendment to BS ISO 11269-1:2012
• BS EN ISO 11357-7:2013 Plastics. Differential scanning calorimetry. Determination of crystallization kinetics
  Implementation of European Standard EN ISO 11357-7 by amendment to BS ISO 11357-7:2002
• BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
  Implementation of European Standard EN ISO 19712-3 by amendment to BS ISO 19712-3:2007

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

• BS ISO 2721:2013 Photography. Film-based cameras. Automatic controls of exposure
• BS ISO 4000-1:2013 Passenger car tyres and rims. Tyres (metric series)
  Supersedes BS ISO 4000-1:2010
• BS ISO 6195:2013 Fluid power systems and components. Cylinder rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
  Supersedes BS ISO 6195:2002
• BS ISO 6265:2013 Alpine skis. Determination of deformation load and breaking load
• BS ISO 6266:2013 Alpine skis. Determination of fatigue indexes. Cyclic loading test
• BS ISO 6747:2013 Earth-moving machinery. Dozers. Terminology and commercial specifications
  Supersedes BS 6914-6:1999
• BS ISO 7539-10:2013 Corrosion of metals and alloys. Stress corrosion testing. Reverse U-bend method
• BS ISO 7790:2013 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
  Supersedes BS ISO 7790:1997
• BS ISO 8536-7:2009 Infusion equipment for medical use. Caps made of aluminium-plastics combinations for infusion bottles
• BS ISO 10115:2013 Essential oil of tarragon (Artemisia dracunculus L.)
• BS ISO 10315:2013 Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method
  Supersedes BS ISO 10315:2000+A1:2011
• BS ISO 10987:2012 Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting
• BS ISO 11711-1:2013 Ships and marine technology. Piping and machinery. Ballast water sampling and analysis. Discharge sampling port
• BS ISO 11843-6:2013 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
• BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics. Oxide-ion-conducting solid electrolytes
• BS ISO 12655:2013 Energy performance of buildings. Presentation of measured energy use of buildings
• BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearing strength
• BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
• BS ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
• BS ISO 13196:2013 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
• BS ISO 13926-3:2012 Pen systems. Seals for pen-injectors for medical use
• BS ISO 14117:2012 Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
• BS ISO 14346:2013 Static design procedure for welded hollow section joints. Recommendations
• BS ISO 14404-1:2013 Calculation method of carbon dioxide emission intensity from iron and steel production. Steel plant with blast furnace
• BS ISO 14404-2:2013 Calculation method of carbon dioxide emission intensity from iron and steel production. Steel plant with electric arc furnace (EAF)
• BS ISO 14540:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
• BS ISO 14541:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
• BS ISO/IEC 15504-5:2012 Information technology. Process assessment. An exemplar software life cycle process assessment model
  Supersedes BS ISO/IEC 15504-5:2006
• BS ISO/IEC 15962:2013 Information technology. Radio frequency identification (RFID) for item management. Data protocol: data encoding rules and logical memory functions
  Supersedes BS ISO/IEC 15962:2004
• BS ISO 16049-1:2013 Air cargo equipment. Restraint straps. Design criteria and testing methods
  Supersedes BS ISO 16049-1:2001
• BS ISO 16304:2013 Ships and marine technology. Marine environment protection. Arrangement and management of port waste reception facilities
• BS ISO 16446:2013 Ships and marine technology. Marine environment protection. Adapter for joining dissimilar boom connectors
  Supersedes BS ISO 16446:2002
• BS ISO 16635-1:2013 Dentistry. Dental rubber dam technique. Hole punch
• BS ISO 16844-1:2013 Road vehicles. Tachograph systems. Electrical connectors
• BS ISO 17363:2013 Supply chain applications of RFID. Freight containers
  Supersedes BS ISO 17363:2007
• BS ISO 18097:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature
• BS ISO/IEC 18450:2013 Information technology. Telecommunications and information exchange between systems. Web Services Description Language (WSDL) for CSTA Phase III
• BS ISO 18927:2013 Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
  Supersedes BS ISO 18927:2008
• BS ISO 20653:2013 Road vehicles. Degrees of protection (IP code). Protection of electrical equipment against foreign objects, water and access
  Supersedes BS ISO 20653:2006
• BS ISO 21218:2013 Intelligent transport systems. Communications access for land mobiles (CALM). Access technology support
  Supersedes BS ISO 21218:2008
• BS ISO 21601:2013 Corrosion of metals and alloys. Guidelines for assessing the significance of stress corrosion cracks detected in service
• BS ISO 22201-2:2013 Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications. Escalators and moving walks (PESSRAE)
• BS ISO 22891:2013 Paper. Determination of transmittance by diffuse reflectance measurement
  Supersedes BS ISO 22891:2007
• BS ISO 23480:2013 Tools for pressing. Sliding plates
  Supersedes BS ISO 23480:2008
• BS ISO 24611:2012 Language resource management. Morphosyntactic annotation framework (MAF)
• BS ISO/IEC 26555:2013 Software and systems engineering. Tools and methods for product line technical management
• BS ISO 26683-1:2013 Intelligent transport systems. Freight land conveyance content identification and communication. Context, architecture and referenced standards
• BS ISO 28005-1:2013 Security management systems for the supply chain. Electronic port clearance (EPC). Message structures
  Supersedes PD ISO/PAS 28005-1:2012
• BS IEC 62671:2013 Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality

PUBLISHED DOCUMENTS

• PD CEN/TS 1555-7:2013 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity
  Supersedes DD CEN/TS 1555-7:2003
• PD ISO/TR 10295-3:2012 Fire tests for building elements and components. Fire testing of service installations. Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
• PD CEN/TR 10317:2013 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
  Supersedes PD CEN/TR 10317:2009
• PD CEN/TR 10350:2013 Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  Supersedes PD CEN/TR 10350:2009
• PD CEN/TS 13388:2013 Copper and copper alloys. Compendium of compositions and products
  Supersedes DD CEN/TS 13388:2008
• PD ISO/TR 14345:2012 Fatigue. Fatigue testing of welded components. Guidance
• PD CEN/TR 15371:2013 Safety of toys. Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8
  Supersedes PD CEN/TR 15371:2009
• PD CEN/TS 15518-4:2013 Winter maintenance equipment. Road weather information systems. Test methods for stationary equipment
• PD CEN/TR 15993:2013 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
  Supersedes PD CEN/TR 15993:2010
• PD CEN/TS 16429:2013 Stationary source emissions. Sampling and determination of hydrogen chloride content in ducts and stacks. Infrared analytical technique
• PD CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007. Fly ash for concrete
• PD CEN/TR 16468:2013 Food analysis. Determination of pesticide residues by GC-MS. Retention times, mass spectrometric parameters and detector response information
• PD CEN/TR 16469:2013 Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements calibration methods and field measurements
• PD ISO/TR 19319:2013 Surface chemical analysis. Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
  Supersedes PD ISO/TR 19319:2003
• PD ISO/PAS 28004-4:2013 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
• PD CLC/TS 50131-2-8:2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors
• PD IEC/TR 61282-10:2013 Fibre optic communication system design guides. Characterization of the quality of optical vector-modulated signals with the error vector magnitude
• PD IEC/TR 61850-1:2013 Communication networks and systems for power utility automation. Introduction and overview
  Supersedes PD IEC/TR 61850-1:2003
• PD IEC/TR 61850-90-7:2013 Communication networks and systems for power utility automation. Object models for power converters in distributed energy resources (DER) systems

PUBLICLY AVAILABLE SPECIFICATIONS

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

• PAS 1192-2:2013 Specification for information management for the capital/delivery phase of construction projects using building information modelling

CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

• BS 8487:2007+A1:2013 The design and construction of gas boosters used in association with combustion equipment. Specification
  AMENDMENT 1
• BS EN 1991-3:2006 Eurocode 1. Actions on structures. Actions induced by cranes and machinery
  CORRIGENDUM 2
• BS EN ISO 6346:1995+A3:2012 Freight containers. Coding, identification and marking
  AMENDMENT 3
• BS EN ISO 10930:2013 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
  CORRIGENDUM 1
• BS EN ISO 11073-10415:2011 Health informatics. Personal health device communication. Device specialization. Weighing scale
  CORRIGENDUM 1
• BS EN ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
  CORRIGENDUM 1
• BS EN ISO 11357-7:2013 Plastics. Differential scanning calorimetry. Determination of crystallization kinetics
  CORRIGENDUM 1
• BS EN 13036-4:2011 Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface: The pendulum test
  CORRIGENDUM 1
• BS EN 13795:2011+A1:2013 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
  AMENDMENT 1
• BS EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification
  AMENDMENT 1
• BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
  CORRIGENDUM 1
• BS EN ISO 22435:2007+A1:2012 Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
  AMENDMENT 1
• BS EN ISO 26986:2012 Resilient floor coverings. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification
  CORRIGENDUM 1
• BS EN 60947-5-2:2007+A1:2012 Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches
  AMENDMENT 1
• BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Single mode fibre pigtailed style optical fuse for category C. Controlled environment
  CORRIGENDUM 1
• BS EN 62282-6-100:2010+A1:2012 Fuel cell technologies. Micro fuel cell power systems. Safety
  AMENDMENT 1
• BS ISO/IEC 9798-2:2008 Information technology. Security techniques. Entity authentication. Mechanisms using symmetric encipherment algorithms
  CORRIGENDUM 3
• BS ISO/IEC 9899:2011 Information technology. Programming languages. C
  CORRIGENDUM 1
• BS ISO 11093-8:2012 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
  CORRIGENDUM 1
• PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
  CORRIGENDUM 1
• BS ISO/IEC 18000-63:2013 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz Type C
  CORRIGENDUM 1
• BS ISO/IEC 19784-4:2011 Information technology. Biometric application programming interface. Biometric sensor function provider interface
  CORRIGENDUM 1
• DD CLC/TS 50131-7:2010 Alarm systems. Intrusion and hold-up systems. Application guidelines
  CORRIGENDUM 1
• PD IEC/TR 62732:2012 Three-digit code for designation of colour rendering and correlated colour temperature
  CORRIGENDUM 1
• DD ISO/TS 19218-1:2011+A1:2013 Medical devices. Hierarchical coding structure for adverse events. Event-type codes
  AMENDMENT 1
• BS S 524:1969+A4:2013 Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 800 MPa)
  AMENDMENT 4
• BS S 536:1970+A2:2013 Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel sheet and strip (500 MPa)
  AMENDMENT 2
• BS S 537:1970+A2:2013 Specification for low carbon 17/12 chromium-nickel- molybdenum corrosion-resisting steel sheet and strip (500 MPa)
  AMENDMENT 2
• BS T 78:1997+A1:2013 Specification for 21⁄2 % nickel-chromium-molybdenum steel tubes (1390 MPa)
  AMENDMENT 1
• BS T 80:1997+A1:2013 Specification for 12 % chromium corrosion resisting steel tubes (770 MPa)
  AMENDMENT 1
• BS 2HC 101:1989+A3:2013 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2 5, Mo 1.5)
  AMENDMENT 3

BRITISH STANDARDS WITHDRAWN

• BS 3900-A10:1998 (ISO 3233:1998) Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
  Superseded by BS EN ISO 3233-1:2013
• BS 4579-2:1973 Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in nickel, iron and plated copper conductors
  This standard is withdrawn as it conflicts with international standards and it is not suitable for further revision
• BS 6860:1987 (ISO 5526:1986) Nomenclature for cereals, pulses and other food grains
  Superseded by BS EN ISO 5526:2013
• BS 6914-6:1999 (ISO 6747:1998) Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for self-propelled crawler and wheel tractors and their equipment
  Superseded by BS ISO 6747:2013
• DD CEN/TS 1555-7:2003 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity
  Superseded by PD CEN/TS 1555-7:2013
• BS EN 12761-1:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. General
  Superseded by BS EN ISO 16119-1:2013
• BS EN 12761-2:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Field crop sprayers
  Superseded by BS EN ISO 16119-2:2013
• BS EN 12761-3:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Air-assisted sprayers for bush and tree crops
  Superseded by BS EN ISO 16119-3:2013
• BS EN 13002-2:1999 Carbon fibre yarns. Test methods and general specifications
  This standard is withdrawn as it is no longer relevant
• BS EN 13135-1:2003+A1:2010 Cranes. Equipment. Electrotechnical equipment
  Superseded by BS EN 13135:2013
• BS EN 13135-2:2004+A1:2010 Cranes. Equipment. Non-electrotechnical equipment
  Superseded by BS EN 13135:2013
• DD ENV 13282:2000 Hydraulic road binders. Composition, specifications and conformity criteria
  Superseded by BS EN 13282-1:2013
• DD CEN/TS 13388:2008 Copper and copper alloys. Compendium of compositions and products
  Superseded by PD CEN/TS 13388:2013
• BS EN 24492:1993 (ISO 4492:1985) Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
  Superseded by BS EN ISO 4492:2013
• BS EN 60335-1:2002+A2:2006 Household and similar electrical appliances. Safety. General requirements
  Superseded by BS EN 60335-1:2002+A14:2010
• BS EN 60335-2-3:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for electric irons
  Superseded by BS EN 60335-2-3:2002+A2:2008
• BS EN 60335-2-3:2002+A2:2008 Household and similar electric appliances. Safety. Particular requirements for electric irons
  Superseded by BS EN 60335-2-3:2002+A11:2010
• BS EN 60335-2-6:2003 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
  Superseded by BS EN 60335-2-6:2003+A2:2008
• BS EN 60335-2-6:2003+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
  Superseded by BS EN 60335-2-6:2003+A11:2010
• BS EN 60335-2-10:2003 Specification for safety of household and similar electrical appliances. Particular requirements for floor treatment machines and wet scrubbing machines
  Superseded by BS EN 60335-2-10:2003+A1:2008
• BS EN 60335-2-12:2003 Specification for safety of household and similar electrical appliances. Particular requirements for warming plates and similar appliances
  Superseded by BS EN 60335-2-12:2003+A1:2008
• BS EN 60335-2-16:2003 Specification for safety of household and similar electrical appliances. Particular requirements for food waste disposers
  Superseded by BS EN 60335-2-16:2003+A1:2008
• BS EN 60335-2-23:2003 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
  Superseded by BS EN 60335-2-23:2003+A1:2008
• BS EN 60335-2-23:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
  Superseded by BS EN 60335-2-23:2003+A11:2010
• BS EN 60335-2-26:2003 Specification for safety of household and similar electrical appliances. Particular requirements for clocks
  Superseded by BS EN 60335-2-26:2003+A1:2008
• BS EN 60335-2-28:2003 Specification for safety of household and similar electrical appliances. Particular requirements for sewing machines
  Superseded by BS EN 60335-2-28:2003+A1:2008
• BS EN 60335-2-44:2002 Specification for safety of household and similar electrical appliances. Particular requirements for ironers
  Superseded by BS EN 60335-2-44:2002+A1:2008
• BS EN 60335-2-45:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for portable heating tools and similar appliances
  Superseded by BS EN 60335-2-45:2002+A1:2008
• BS EN 60335-2-51:2003 Specification for safety of household and similar electrical appliances. Particular requirements for stationary circulation pumps for heating and service water installations
  Superseded by BS EN 60335-2-51:2003+A1:2008
• BS EN 60335-2-52:2003 Specification for safety of household and similar electrical appliances. Particular requirements for oral hygiene appliances
  Superseded by BS EN 60335-2-52:2003+A1:2008
• BS EN 60335-2-52:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for oral hygiene appliances
  Superseded by BS EN 60335-2-52:2003+A11:2010
• BS EN 60335-2-55:2003 Specification for safety of household and similar electrical appliances. Particular requirements for electrical appliances for use with aquariums and garden ponds
  Superseded by BS EN 60335-2-55:2003+A1:2008
• BS EN 60335-2-56:2003 Specification for safety of household and similar electrical appliances. Particular requirements for projectors and similar appliances
  Superseded by BS EN 60335-2-56:2003+A1:2008
• BS EN 60335-2-65:2003 Specification for safety of household and similar electrical appliances. Particular requirements for air-cleaning appliances
  Superseded by BS EN 60335-2-65:2003+A1:2008
• BS EN 60335-2-66:2003 Specification for safety of household and similar electrical appliances. Particular requirements for water-bed heaters
  Superseded by BS EN 60335-2-66:2003+A1:2008
• BS EN 60335-2-78:2003 Specification for safety of household and similar electrical appliances. Particular requirements for outdoor barbecues
  Superseded by BS EN 60335-2-78:2003+A1:2008
• BS EN 60335-2-82:2003 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for amusement machines and personal service machines
  Superseded by BS EN 60335-2-82:2003+A1:2008
• BS EN 60335-2-83:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Heated gullies for roof drainage
  Superseded by BS EN 60335-2-83:2002+A1:2008
• BS EN 60335-2-84:2003 Specification for safety of household and similar electrical appliances. Particular requirements for toilets
  Superseded by BS EN 60335-2-84:2003+A1:2008
• BS EN 60335-2-85:2003 Specification for safety of household and similar electrical appliances. Particular requirements for fabric steamers
  Superseded by BS EN 60335-2-85:2003+A1:2008
• BS EN 60335-2-101:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for vaporizers
  Superseded by BS EN 60335-2-101:2002+A1:2008
• BS EN 60335-2-105:2005 Specification for safety of household and similar electrical appliances. Particular requirements for multifunctional shower cabinets
  Superseded by BS EN 60335-2-105:2005+A1:2008
• BS EN 60335-2-105:2005+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for multifunctional shower cabinets
  Superseded by BS EN 60335-2-105:2005+A11:2010
• BS EN 60439-4:2004 Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
  Superseded by BS EN 61439-4:2013
• BS EN 60495:1994 Single sideband power-line carrier terminals
  Superseded by BS EN 62488-1:2013
• BS EN 61243-3:1999 Live working. Voltage detectors. Two-pole low voltage type
  Superseded by BS EN 61243-3:2010
• PD ISO/PAS 28005-1:2012 Ships and marine technology. Electronic port clearance (EPC). Message structures. Implementation of a maritime single window system
  Superseded by BS ISO 28005-1:2013
• BS IEC 61513:2011 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
  Superseded by BS EN 61513:2013
• BS IEC 61772:2009 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
  Superseded by BS EN 61772:2013
• BS ISO 81400-4:2005 Wind turbines. Design and specification of gearboxes
  Superseded by BS EN 61400-4:2013
• PD 0010:1997 The principles of good practice for information management
  This standard is withdrawn as it is no longer relevant

You can now purchase PDFs of IEC Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. IEC Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel.

• IEC Q03-3-1:2013 Rules of Procedure. IECQ Approved Component Products, Related Materials & Assemblies Scheme, IECQ Approved Component. Technology Certification (IECQ AC-TC)
• IEC Q03-3-2:2013 Rules of Procedure. IECQ Approved Component Products, Related Materials & Assemblies Scheme, IECQ Approved Component. Automotive Qualification Programme (IECQ ACAQP)
• IEC 60061-1:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Lamp caps
  AMENDMENT 49:February 2013
• IEC 60061-2:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
  AMENDMENT 46:February 2013
• IEC 60061-3:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges
  AMENDMENT 47:February 2013
• IEC/TS 60076-19:2013 Power transformers. Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
• IEC 60127-7:2013 Miniature fuses. Miniature fuse-links for special applications
• IEC 60216-1:2013 (Edition 6) Electrical insulating materials. Thermal endurance properties. Ageing procedures and evaluation of test results
• IEC 60216-8:2013 Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics using simplified procedures
• IEC 60243-1:2013 (Edition 3) Electric strength of insulating materials. Test methods. Tests at power frequencies
• IEC 60269-3:2010 Low voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Examples of standardized systems of fuses A to F
  CORRIGENDUM 1:March 2013
• IEC 60335-2-70:2002 Household and similar electrical appliances. Safety. Particular requirements for milking machines
  AMENDMENT 2:March 2013
• IEC 60598-2-18:1993 Luminaires. Particular requirements. Luminaires for swimming pools and similar applications
  CORRIGENDUM 1:March 2013
• IEC 60601-2-20:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant transport incubators
  CORRIGENDUM 2:February 2013
• IEC 60601-2-21:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant radiant warmers
  CORRIGENDUM 1:February 2013
• IEC 60913:2013 (Edition 2) Railway applications. Fixed installations. Electric traction overhead contact lines
• IEC 61083-2:2013 (Edition 2) Instruments and software used for measurement in high-voltage and high-current tests. Requirements for software for tests with impulse voltages and currents
• IEC 61169-43:2013 Radio-frequency connectors. Sectional specification for RBMA series blind mating RF coaxial connectors
• IEC 61209:1999 Maritime navigation and radiocommunication equipment and systems. Integrated Bridge Systems (IBS). Operational and performance requirements, method of testing and required test results
• IEC 61300-3-49:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Guide pin retention force for rectangular ferrule multi-fibre connectors
• IEC 61400-12-2:2013 Wind turbines. Power performance of electricity-producing wind turbines based on nacelle anemometry
• IEC 61730-1:2004 Photovoltaic (PV) module safety qualification. Requirements for construction
  AMENDMENT 2:March 2013
• IEC 61747-2-1:2013 (Edition 2) Liquid crystal display devices. Passive matrix monochrome LCD modules. Blank detail specification
• IEC 61753-058-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Single mode fibre pigtailed style optical power limiter for category C. Controlled environment
• IEC 61753-059-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Singlemode fibre plug-receptacle style optical limiter for category C. Controlled environment
• IEC 61753-088-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments
• IEC 61753-089-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment
• IEC 61892-2:2012 Mobile and fixed offshore units. Electrical installations. System design
  CORRIGENDUM 1:March 2013
• IEC 61968-11:2013 (Edition 2) Application integration at electric utilities. System interfaces for distribution management. Common information model (CIM) extensions for distribution
• IEC 62068:2013 Electrical insulating materials and systems. General method of evaluation of electrical endurance under repetitive voltage impulses
• IEC/TS 62257-9-5:2013 (Edition 2) Recommendations for small renewable energy and hybrid systems for rural electrification. Integrated system. Selection of stand-alone lighting kits for rural electrification
• IEC 62287-2:2013 Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS). Self-organising time division multiple access (SOTDMA) techniques
• IEC 62497-1:2010 Railway applications. Insulation coordination. Basic requirements. Clearances and creepage distances for all electrical and electronic equipment
  AMENDMENT 1:March 2013
• IEC 62516-3:2013 Terrestrial digital multimedia broadcasting (TDMB) receivers. Common API
• IEC 62683:2013 Low-voltage switchgear and controlgear. Product data and properties for information exchange
• IEC 62698:2013 Multimedia home server systems. Rights information interoperability for IPTV
• IEC/TR 62725:2013 Analysis of quantification methodologies for greenhouse gas emissions for electrical and electronic products and systems
• CISPR 16-2-1:2008 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements
  AMENDMENT 2:March 2013

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

• ISO 105-E01:2013 (Edition 6) Textiles. Tests for colour fastness. Colour fastness to water
• ISO 105-E04:2013 (Edition 6) Textiles. Tests for colour fastness. Colour fastness to perspiration
• ISO 307:2007 Plastics. Polyamides. Determination of viscosity number
  AMENDMENT 1:April 2013
• ISO 340:2013 (Edition 4) Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
• ISO 525:2013 (Edition 4) Bonded abrasive products. General requirements
• ISO 1797-3:2013 Dentistry. Shanks for rotary instruments. Shanks made of ceramics
• ISO 3384-1:2011 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing at constant temperature
  AMENDMENT 1:March 2013
• ISO 3898:2013 (Edition 4) Bases for design of structures. Names and symbols of physical quantities and generic quantities
• ISO 5840-3:2013 Cardiovascular implants. Cardiac valve prostheses. Heart valve substitutes implanted by trans-catheter techniques
• ISO 5902:2013 (Edition 2) Alpine skis. Determination of elastic properties
• ISO 6873:2013 (Edition 3) Dentistry. Gypsum products
• ISO 7133:2013 (Edition 3) Earth-moving machinery. Scrapers. Terminology and commercial specifications
• ISO 7870-2:2013 Control charts. Shewhart control charts
• ISO 8528-5:2013 (Edition 3) Reciprocating internal combustion engine driven alternating current generating sets. Generating sets
• ISO 8600-1:2013 (Edition 3) Endoscopes. Medical endoscopes and endotherapy devices. General requirements
• ISO 8637:2010 Cardiovascular implants and extracorporeal systems. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
  AMENDMENT 1:April 2013
• ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation. Gas-phase air cleaning devices (GPACD)
• ISO 11114-2:2013 (Edition 2) Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials
• ISO 11357-5:2013 (Edition 2) Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• ISO 11433:1993 Nickel alloys. Determination of titanium content. Diantipyrylmethane molecular absorption spectrometric method
  AMENDMENT 1:March 2013
• ISO 11451-4:2013 (Edition 3) Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
• ISO 11553-3:2013 Safety of machinery. Laser processing machines. Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
• ISO 11890-2:2013 (Edition 2) Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas chromatographic method
• ISO 12345:2013 (Edition 2) Diesel engines. Cleanliness assessment of fuel injection equipment
• ISO 12759:2010 Fans. Efficiency classification for fans
  AMENDMENT 1:April 2013
• ISO 12855:2012 Electronic fee collection. Information exchange between service provision and toll charging
  CORRIGENDUM 1:April 2013
• ISO 13120:2013 Health informatics. Syntax to represent the content of healthcare classification systems. Classification Markup Language (ClaML)
• ISO/TS 13141:2010 Electronic fee collection. Localisation augmentation communication for autonomous systems
  CORRIGENDUM 1:April 2013
• ISO/TR 13184-1:2013 Intelligent transport systems. Guidance protocol via personal ITS station for advisory safety systems. General information and use case definitions
• ISO 13408-6:2005 Aseptic processing of health care products. Isolator systems
  AMENDMENT 1:March 2013
• ISO/TS 13447:2013 Fire safety engineering. Guidance for use of fire zone models
• ISO/TS 13582:2013 Health informatics. Sharing of OID registry information
• ISO 13832:2013 Aerospace. Wire, aluminium alloy and copper clad aluminium conductors. General performance requirements
• ISO 13833:2013 Stationary source emissions. Determination of the ratio of biomass (biogenic) and fossil derived carbon dioxide. Radiocarbon sampling and determination
• ISO 14065:2013 (Edition 2) Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
• ISO 14229-1:2013 (Edition 2) Road vehicles. Unified diagnostic services (UDS). Specification and requirements
• ISO 14229-6:2013 Road vehicles. Unified diagnostic services (UDS). Unified diagnostic services on K-Line implementation (UDSonK-Line)
• ISO 14230-2:2013 (Edition 2) Road vehicles. Diagnostic communication over K-Line (DoK-Line). Data link layer
• ISO 14451-1:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Terminology
• ISO 14451-2:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Test methods
• ISO 14451-3:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Labelling
• ISO 14451-4:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Requirements and categorization for micro gas generators
• ISO 14451-5:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Requirements and categorization for airbag gas generators
• ISO 14451-6:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Requirements and categorization for airbag modules
• ISO 14451-7:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Requirements and categorization for seatbelt pretensioners
• ISO 14451-8:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Requirements and categorization for igniters
• ISO 14451-9:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Requirements and categorization for actuators
• ISO 14451-10:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles. Requirements and categorization for semi-finished products
• ISO 14574:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of tensile properties
• ISO 14906:2011 Electronic fee collection. Application interface definition for dedicated short-range communication
  CORRIGENDUM 1:April 2013
• ISO 14934-2:2013 (Edition 2) Fire tests. Calibration and use of heat flux meters. Primary calibration methods
• ISO 15012-1:2013 (Edition 2) Health and safety in welding and allied processes. Equipment for capture and separation of welding fume. Requirements for testing and marking of separation efficiency
• ISO 15110:2013 Paints and varnishes. Artificial weathering including acidic deposition
• ISO/TS 15216-1:2013 Microbiology of food and animal feed. Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR. Method for quantification
• ISO/TS 15216-2:2013 Microbiology of food and animal feed. Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR. Method for qualitative detection
• ISO/IEC 15444-11:2007 Information technology. JPEG 2000 image coding system: Wireless
  AMENDMENT 1:April 2013
• ISO/TR 15608:2013 (Edition 3) Welding. Guidelines for a metallic materials grouping system
• ISO 15609-6:2013 Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser-arc hybrid welding
• ISO/IEC 15961-1:2013 Information technology. Radio frequency identification (RFID) for item management: Data protocol. Application interface
• ISO/TR 16218:2013 Packaging and the environment. Processes for chemical recovery
• ISO 16304:2013 Ships and marine technology. Marine environment protection. Arrangement and management of port waste reception facilities
• ISO 16354:2013 Guidelines for knowledge libraries and object libraries
• ISO/TR 16743:2013 Optics and photonics. Wavefront sensors for characterising optical systems and optical components
• ISO/TR 17209:2013 Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads
• ISO/IEC 17568:2013 Information technology. Telecommunications and information exchange between systems. Close proximity electric induction wireless communications
• ISO/TS 17575-1:2010 Electronic fee collection. Application interface definition for autonomous systems. Charging
  CORRIGENDUM 1:April 2013
• ISO/TS 17575-3:2011 Electronic fee collection. Application interface definition for autonomous systems. Context data
  CORRIGENDUM 1:April 2013
• ISO/IEC 18092:2013 (Edition 2) Information technology. Telecommunications and information exchange between systems. Near Field Communication. Interface and Protocol (NFCIP-1)
• ISO/TR 18267:2013 Timber structures. Review of design standards
• ISO 18436-8:2013 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Ultrasound
• ISO/IEC 19794-9:2011 Information technology. Biometric data interchange formats. Vascular image data
  AMENDMENT 1:March 2013
• ISO/IEC 19794-14:2013 Information technology. Biometric data interchange formats. DNA data
• ISO 20471:2013 High visibility clothing. Test methods and requirements
• ISO 21178:2013 (Edition 2) Light conveyor belts. Determination of electrical resistances
• ISO 21179:2013 (Edition 2) Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt
• ISO 21571:2005 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Nucleic acid extraction
  AMENDMENT 1:March 2013
• ISO/TR 22201-3:2013 Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications. Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
• ISO/IEC 23000-10:2012 Information technology. Multimedia application format (MPEG-A). Surveillance application format
  CORRIGENDUM 1:February 2013
• ISO/IEC 23005-6:2013 (Edition 2) Information technology. Media context and control. Common types and tools
• ISO/IEC 23006-5:2013 Information technology. Multimedia service platform technologies. Service aggregation
• ISO/IEC 24761:2009 Information technology. Security techniques. Authentication context for biometrics
  CORRIGENDUM 1:March 2013
• ISO/IEC TR 24772:2013 (Edition 2) Information technology. Programming languages. Guidance to avoiding vulnerabilities in programming languages through language selection and use
• ISO 25597:2013 Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
• ISO 25964-2:2013 Information and documentation. Thesauri and interoperability with other vocabularies. Interoperability with other vocabularies
• ISO/IEC TR 29108:2013 Information technology. Terminology for intelligent homes
• ISO/IEC 29115:2013 Information technology. Security techniques. Entity authentication assurance framework
• ISO/IEC 29142-1:2013 Information technology. Print cartridge characterization. General: terms, symbols, notations and cartridge characterization framework
• ISO/IEC 29142-2:2013 Information technology. Print cartridge characterization. Cartridge characterization data reporting
• ISO 29462:2013 Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow
• ISO/TM 51261:2013 (Edition 2) Practice for calibration of routine dosimetry systems for radiation processing
• ISO/TM 51631:2013 (Edition 3) Practice for use of calorimetric dosimetry systems for electron beam dose measurements and routine dosimetry system calibration
• ISO/TM 51702:2013 (Edition 3) Practice for dosimetry in a gamma facility for radiation processing
• ISO/TM 51940:2013 (Edition 3) Guide for dosimetry for sterile insects release programs
• ISO/TM 52116:2013 (Edition 2) Practice for dosimetry for a self-contained dry storage gamma irradiator

ISO/PAS PUBLICATIONS

• ISO/PAS 11819-4:2013 Acoustics. Method for measuring the influence of road surfaces on traffic noise. SPB method using backing board