DRAFT STANDARDS FOR COMMENT
Free to download from our website: www.standards.co.nz
DR 28980 Ophthalmic optics – Spectacle lenses – Parameters affecting lens power measurement
This draft proposes the adoption of ISO 8980-1 and ISO 8980-2 as joint Australian/New Zealand Standards, and explains the changes relating to power measurement in the revised editions of ISO 8980-1 and ISO 8980-2. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 16034 Ophthalmic optics – Specifications for single-vision ready-to-wear near- vision spectacles
This draft proposes the adoption of ISO 16034 as a joint Australian/New Zealand Standard, and specifies the minimum requirements for complete single vision ready to near wear vision spectacles. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 10322.1 Ophthalmic optics – Semi-finished spectacle lens blanks – Part 1: Specifications for single-vision and multifocal lens blanks
This draft proposes the adoption of ISO 10322.1 as a joint Australian/New Zealand Standard, and specifies requirements for the optical and geometrical properties of semi-finished single-vision and multifocal spectacle lens blanks. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 10322.2 Ophthalmic optics – Semi-finished spectacle lens blanks – Part 2: Specifications for progressive power lens blanks
This draft proposes the adoption of ISO 10322.2 as a joint Australian/New Zealand Standard, and specifies requirements for the optical and geometrical properties of semi-finished progressive power spectacle lens blanks. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 13666 Ophthalmic optics – Spectacle lenses – Vocabulary
This draft proposes the adoption of ISO 13666 as a joint Australian/New Zealand Standard, and defines basic terms relating to ophthalmic optics. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 14889 Ophthalmic optics – Spectacle lenses – Fundamental requirements for uncut finished lenses
This draft proposes the adoption of ISO 14889 as a joint Australian/New Zealand Standard and specifies fundamental requirements for uncut finished spectacle lenses To view the read-only copy of the ISO Standard please go to
http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 21987 Ophthalmic optics – Mounted spectacle lenses
This draft proposes the adoption of ISO 21987 as a joint Australian/New Zealand Standard, and specifies requirements for mounted spectacle lenses relative to the prescription order. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 8624 Ophthalmic optics – Spectacle frames – Measuring system and terminology
This draft proposes the adoption of ISO 8624 as a joint Australian/New Zealand Standard and specifies a measuring system for spectacle frames. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 8980.1 Ophthalmic optics – Uncut finished spectacle lenses – Part 1: Specifications for single-vision and multifocal lenses
This draft proposes the adoption of ISO 8980.1 as a joint Australian/New Zealand Standard and specifies requirements for the optical and geometrical properties for uncut finished single-vision and mulitfocal spectacle lenses. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 8980.2 Ophthalmic optics – Uncut finished spectacle lenses – Part 2: Specifications for progressive power lenses
This draft proposes the adoption of ISO 8980.2 as a joint Australian/New Zealand Standard,and specifies requirements for the optical and geometrical properties for uncut finished progressive lenses. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 8980.3 Ophthalmic optics – Uncut finished spectacle lenses – Part 3: Transmittance specifications and test methods
This draft proposes the adoption of ISO 8980.3 as a joint Australian/New Zealand Standard, and specifies the requirements for the transmittance properties of uncut finished spectacle lenses. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 8980.4 Ophthalmic optics – Uncut finished spectacle lenses – Part 4: Specifications and test methods for anti-reflective coatings
This draft proposes the adoption of ISO 8980.4 as a joint Australian/New Zealand Standard, and specifies optical and non optical requirements and test methods for anti-reflective coatings and spectacle lenses. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010
DR 8980.5 Ophthalmic optics – Uncut finished spectacle lenses – Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
This draft proposes the adoption of ISO 8980.5 as a joint Australian/New Zealand Standard, and specifies the requirement and test method for spectacle lens surfaces that are claimed to provide a basic level of abrasion resistance. To view the read-only copy of the ISO Standard please go to http://spex.standards.co.nz/restrictedAccess.jsp?id=ophthalmology
Public comment on this draft closes on 19 October 2010