Specification for concrete production – Amendment 2 published
27 April 2010
Standards New Zealand has published Amendment 2 to Specification for concrete production NZS 3104:2003. Amendment 2 is the result of a project sponsored by the New Zealand Ready Mixed Concrete Association to incorporate a new type of mechanism for the testing of weigh systems.
Since the initial drafting of NZS 3104, clauses dealing with weigh scale checking have remained unchanged. In this time there has been a significant introduction of load cell technology replacing the mechanical knife-edge systems that dominated in 1983.
- recognises that there is now more than one type of mechanism used for weigh systems (knife edge/lever arm and load cell)
- updates Clause 2.7.3 to take into account testing of weigh systems that are dependent on load cell mechanisms
- corrects minor errors in the Contents
- corrects Clauses 1.3, 2.9.1, and 3.1.4.
Download this amendment for free from www.standards.co.nz (note that a charge applies for hard copies of amendments). Order or download NZS 3104:2003 with all amendments incorporated from www.standards.co.nz (enter keyword '3104' in search panel, email firstname.lastname@example.org, or call 0800 782 632 during business hours.
Stay in touch
Subscribe to Standards New Zealand's monthly e-magazine Touchstone for the very latest news on Standards.
The question is not what you gain from standardisation, it's what you lose without it.
Standards New Zealand
(04) 498 3986
About Standards New Zealand
Standards New Zealand is the operating arm of the Standards Council, and part of New Zealand's standards and conformance infrastructure. Standards New Zealand is an autonomous Crown entity responsible for managing the development and distribution of Standards across a range of sectors nationally.
Standards New Zealand is a self-funded, not-for-profit organisation, relying on revenue primarily from contracts with sponsors to develop Standards, and from sales of Standards publications. Our independence helps us facilitate a cross section of stakeholders' contributions to the development of Standards, and ensure that each Standard meets the needs of end users.